Require assistance in activating the inner brake lights.

Icksieray

Greetings,

I own a pre-LCI G30 with retrofitted LCI rear lights.

I have observed that when I use the brakes, just the outside lights illuminate more brightly, but the inside lights do not.

Kindly assist me in programming the inner lights for braking purposes as well. Is this achievable in Bimmercode?

Thank you.

TXCoyote

Requires additional wiring for the inner tail lights to enable the turn signal.

Icksieray

The turn signals seem to be functioning for both the inner and exterior lights (bottom amber strip, see attached). Do I still need the additional wire for the red section of the light?

TXCoyote

I believed there was a problem with the turn signal. With appropriate code, the brake lights should function correctly. What programming did you undertake?

Icksieray

I have not yet engaged in any coding on it. The prior owner has the LCI lights pre-installed. Regrettably, I will not be able to ascertain the code he used on the lights.

TXCoyote

I can verify whether the code is right.

zyrtecx

Were you able to make it operational? Could you kindly provide information, as I am experiencing the same issue?

Icksieray

My rear lights are aftermarket copies of the LCI lights. I discovered an additional wire from the outside light concealed behind the trunk trim, which I connected to the inside light, resulting in the functionality of both the exterior and interior brake lights. I am uncertain as to why the former owner did not do this action.